Table of Contents

Advertisement

INSTALLATION
If you connect more than 2 battery modules to the system, please only install the
additional batteries 3-6 by the side of the system. You can connect up to 6 batteries, 2
each mounted on top of each other, to the SMILE5.
To do this, carry out the individual installation steps as for the first two batteries,
including the DIP setting on the last module.
Figure 26 Increase the Battery Modules
Note: Recommended external PV circuit breaker rating is not less than 25A.
Note: the RCD unit must be installed. A 100mA RCD device is recommended.

2.2.3 Single Line Diagram

The single line diagrams of DC-, AC- and Hybrid-coupled system are as below:
Figure 27 DC-coupled system
20
21
Figure 28 AC-coupled system
Figure 29 Hybrid-coupled system
INSTALLATION

Advertisement

Table of Contents
loading

Table of Contents