Replenishment Volume - Kodak X-Omat 460 RA Operator's Manual
Hide thumbs
Also See for X-Omat 460 RA:
- Service manual (101 pages) ,
- Installation instructions manual (44 pages)
Table of Contents
Advertisement
Replenishment Volume
Description
26
Changes to the replenishment volume will be stored for the cycle until new changes
are made. Replenishment volume is dependent on the replenishment mode:
Automatic or Flooded.
In the Automatic Replenishment mode, replenishment solutions are added when an
area of film equivalent to approximately 1500 square cm (240 square inches) has been
processed, for example, one 35 x 43 cm (14 x 17 in.) sheet film.
As film usage for the processor lessens, the volumes of developer and fixer necessary
for correct replenishment increase.
Film Usage
Low
Medium
High
The operator enters the volume for developer (V
the keypad for high film usage. The microprocessor automatically calculates the
replenishment volumes for low and medium film usage.
Film Usage
Low
Medium
High
In the Flooded Replenishment mode, developer and fixer replenishment volumes
are—
• 65 ml every 5 minutes and
• 65 ml for each 1500 square cm (240 square inches) of film.
(Auto) Replenishment Volume
Films/
Developer
1
⁄
hour
(ml/sheet)
2
1 - 2
3 - 4
5
(or more)
) and fixer (V
dev
New (Auto) Replenishment Volume
Developer(ml/sheet)
1.67 x (V
)
dev
1.33 x (V
)
dev
(V
)
dev
Fixer
(ml/sheet)
100
120
80
100
60
85
) replenishments on
fix
Fixer(ml/sheet)
1.41 x (V
1.18 x (V
(V
)
fix
)
fix
)
fix
636736
Advertisement
Table of Contents
