Operating Instructions; Daily Start-Up - Kodak X-Omat 460 RA Operator's Manual

Daily Start-up

DETECTOR
CROSSOVER
ASSEMBLY
FILTER BEZEL
SPLASH GUARD
32

Operating Instructions

[1] Check that all the Racks and Crossovers are in their correct positions.
[2] Check that the developer heat exchanger cover is correctly positioned in the
bottom of the developer tank.
[3] Check that the Wash Water Hoses are connected.
[4] Check that the developer and fixer solutions are at the overflow level of each
tank.
DEVELOPER/FIXER
CROSSOVER
Figure 7 Racks and Crossovers
[5] Install the Evaporation Covers if they are not already installed.
Figure 8 Evaporation Covers
[6] Install the top cover onto the processor.
WASH WATER
HOSES
FIXER/WASH
CROSSOVER
H108_0051BCB
H108_0051BA
EVAPORATION
COVERS
H108_0055BCC
H108_0055BA
636736