Replenishment Modes - Kodak X-Omat 460 RA Operator's Manual

Replenishment Modes

Description
636736
Automatic
Replenishment Mode
Flooded
Replenishment Mode
Tank Fill Mode
Disable
Replenishment
Select this mode when you want the processor to
automatically adjust the replenishment volumes for developer
and fixer according to the film usage for the processor. See
''Replenishment Volume'' beginning on page 26.
Check with your Kodak representative to see whether the
Flooded Replenishment Mode is right for your film usage.
Replenishment will be added automatically—
• every 5 minutes, achieving a minimum replenishment of
780 ml/hr while the processor is on and
• when the equivalent film area of 35x43 cm has been
processed.
Select this mode when you want the processor tanks to fill
automatically. In this mode the processor tanks fill with
solution from the replenishment tanks until the level sensors
detect that the processor tanks are full.
Select this feature to disable the replenisher pumps before
doing any of the cleaning procedures.
17