Temperature Lockout Mode - Kodak X-Omat 460 RA Operator's Manual

Temperature Lockout Mode

Description
Procedure
636736
Selecting ''ON'' automatically disables the transport system whenever the developer
temperature deviates from the specified temperature range. The transport system
remains disabled until the temperature of the developer is back within the specified
temperature range.
Selecting ''OFF'' allows the processor to accept film even when the developer
temperature deviates from specified temperature range.
When using accessory equipment, the ''Temperature Lockout'' must be ''OFF''.
[1] To select on or off for the ''Temperature Lockout'' mode, press the ''GO TO
SETUP'' key.
READY
135 F = DRYER SETPOINT
_______________________________________
|
/\ \/
|
DRYER DRYER
|
[2] Enter the 4 digit access code.
|
|
1 2
|
[3] Press the ''OPTIONS'' key.
|
CYCLE SETUP
|
PROC-
|
ESS
[4] Press the ''TEMP LOCK'' key.
|
REPLEN TEMP
|
MODE LOCK
|
[5] Press the ''SELECT ON'' or ''SELECT OFF'' key.
|
SELECT SELECT
|
OFF ON
|
[6] Immediately, press the ''DONE/RETURN'' key to store the entry.
IMPORTANT
STD
| | |
SELECT DISPLAY GO TO
| | |
CYCLE FIX SETUP
| | |
TEMP
| | |
CANCEL
| | |
3 4 REQUEST
| | |
| | |
DONE/
| | |
OPTIONS LANG RETURN
| | |
| | |
DISPLAY DONE/
| | |
UNITS MORE RETURN
| | |
| | |
DONE/
| | |
RETURN
| | |
19