570J2K-HW-X19
Multi channel J2K Encoder-Decoder
5.1.
SYSTEM
Figure 5-3 : WebEASY
- System Tab (Part 1)
®
5.1.1. System
Card Alias: This control returns the card alias string.
5.1.2. Control Port Configuration
IP Address: This Parameter allows the user to set the IP address for control port.
Netmask: This Parameter allows the user to set the Netmask for control port.
Gateway: This parameter allows the user to set the Gateway for control port.
Please note the control port is only used when the 570J2K-HW-X19 is used in the S570FR.
5.1.3. Data Port Configuration
IP Address: This parameter allows the user to set the IP address for data port.
Netmask: This parameter allows the user to set the Netmask for data port.
Page - 13
Revision 1.0