4.
VISTALINK
4.1.
CONTROL PORT CONTROL
Note: There is only one physical control port on the unit, both IP's come from
the same Network Interface Card (NIC). This allows the unit to be controlled via
multiple subnets on this port.
IP Address: This parameter allows the user to set an IP address for the control port.
NetMask: This parameter allows the user to set the netmask (subnet) for the control port.
Gateway: This parameter allows the user to set the gateway address for the control port.
4.2.
DATA PORT CONTROL
IP Address: This parameter allows the user to set an IP address.
IP NetMask:This parameter allows the user to set the netmask (subnet).
IP Gateway: This parameter allows the user to set the gateway address.
PRO INTERFACE
®
Figure 4-1: Control Port Tab
Figure 4-2: Data Port Tab
JPEG2000 to HDMI Converter User Manual
Revision 0.1
2430RX-J2K-IP
Page - 7