Pin Assignment Connector; Expansion From 2 To 4 Measuring Channels; Connection Socket For Optional Data Interface; Technical Data - sauter FS Series Manual

7.2.3 Pin assignment connector

7.3 Expansion from 2 to 4 measuring channels

Each unit is factory-equipped with sockets for 4 measuring channels, even if you have
purchased a variant with 2 channels.

7.4 Connection socket for optional data interface

The socket is available on the unit! Interface currently not available.

8 Technical data

8.1 Battery

- Lithium-ion rechargeable battery
- Nominal voltage 3.7V
- Capacity 2400mAh or 8.88Wh
Safety data sheets are available in the manufacturer's webshop or on
request! Do not use devices with defective batteries! Do not send defective
batteries or devices with defective batteries!
10
Pin Connection
1 N.C.
2 Memory chip IO
3 Memory chip GND
4 N.C.
5 N.C.
6 Supply +
7 Input +
8 Input -
9 Supply +
10 N.C.
FS-BA-en-2210.docx