sauter FH-M Instruction Manual

Thank you for buying a SAUTER force gauge. We hope
you are pleased with your high quality force gauge with its
big functional range. If you have any queries, wishes or
helpful suggestions, do not hesitate to call our service
number.
„Sensor Outside" means the cell is outside the body.
1. Included in Delivery
- SAUTER FH, incl. rechargeable battery
- Carrying Case
- Charger
- 5 pcs. M3x 8 screws
Pilot lamp
4-pin Sensor Force sensor
bushing
Force sensor,
RS 232 port
M6- thread
FH_SO-BA-e-1217
Sauter GmbH
Ziegelei 1
D-72336 Balingen
E-Mail: info@kern-sohn.com
Instruction Manual
FH
FH-M DIGITALNY SILOMER(SK)
Set
LCD
Tel: +49-[0]7433- 9933-0
Fax: +49-[0]7433-9933-149
Internet: www. kern-sohn.com
Important annotation:
By pressing the RESET key (on the right side of housing,
see illustration on the left), individual settings and
memorised values can be re-set or erased, in example for
a new start of the instrument after an operating error.
Data in mm
Length of cable between display and sensor: 2500 mm
Measurement Terms:
Track = continuous measurement
Peak = Capture of the maximum value
Dimensions of Sensors (from FH200k on inquiry)
2. Working Conditions
10°C to 30°C / 15% up to 80% humidity
Sensor
Outside
1