Advertisement
Quick Links
Manual
Force Gauge
FL
PCE Americas Inc.
711 Commerce Way
Suite 8
Jupiter
FL-33458
USA
From outside US: +1
Tel: (561) 320-9162
Fax: (561) 320-9176
info@pce-americas.com
www.pce-instruments.com/english
www.pce-instruments.com
PCE Instruments UK Ltd.
Units 12/13
Southpoint Business Park
Ensign way
Hampshire / Southampton
United Kingdom, SO31 4RF
From outside UK: +44
Tel: (0) 2380 98703 0
Fax: (0) 2380 98703 9
info@pce-instruments.com
Advertisement
Related Manuals for sauter FL
Summary of Contents for sauter FL
- Page 1 PCE Instruments UK Ltd. 711 Commerce Way Units 12/13 Suite 8 Southpoint Business Park Jupiter Ensign way FL-33458 Hampshire / Southampton United Kingdom, SO31 4RF From outside US: +1 From outside UK: +44 Tel: (561) 320-9162 Tel: (0) 2380 98703 0...
- Page 2 Basic Functions section. You can press a menu key to access the gauge configuration- see the Main Menu section. 4. Powering the FL The FL is supplied with a set of 4 Nickel Metal Hydride AA rechargeable batteries. safety...
- Page 3 *If a force is applied via the load cell sensor (hole at the bottom of the FL), the reading on display will register the Changing the mode of measurement applied force. You can choose the following modes of measurement:...
- Page 4 The displayed reading may be transmitted to PC by has been pressed. The AO will appear in the main display pressing the PRINT key or sending request command from if you activate this feature. PC to the gauge. Figure 5 FL-BA-e-1411...
- Page 5 DELETE menu. Figure 7b Delete last Menu Press UP and DOWN to select the delete option. If you selected NO and press ENTER key, the gauge will return Example LOWER LEVEL = 10 N, UPPER LEVEL = 20 N FL-BA-e-1411...
- Page 6 5) DIAGNOSTIC This is used to check status of the load cell. If you suspect The FL-series have an analog output +/- 2V, that your load cell transducer has sustained an overload it In normal operation use analog value depend on the is possible to check the status of the load cell immediately.
- Page 7 Temperature shift at zero load: ± 0.04 % of full-scale/ºC Output RS-232 and USB: 8 data bits, 1 Start bit, 1 Stop bit, no parity Baud rate: 38400 Peak Capture Rate : 0.100 S ADC Sampling Rate : 1,000 Hz FL-BA-e-1411...