Transport Case For Accessories; Read Out Stored Measured Values With Excel Plug-In - sauter FS Series Manual

13.3 Transport case for accessories

For the transport and storage of external sensors, accessories and tools, the transport
case for accessories is available with the article designation FS TKZ. The transport
case for the force gauge included in the scope of delivery can be connected to several
other cases via the "T-LOCK" fastener.

13.4 Read out stored measured values with EXCEL plug-in

With the optionally available EXCEL plug-in SAUTER AFI 2.0, stored measurement
data can be transferred to a PC. (EXCEL software not included in delivery!)
14 Power supply
14.1 Charging the battery
The device is equipped with a rechargeable battery at the factory. Charge the battery
using the supplied USB-C cable and a power source with the following values:
- Voltage: 5V DC
- Current: 1A
If a power source and USB cable have been connected correctly, the plug symbol
appears in the display to the right of the battery charge status when the unit is switched
on.
FS-BA-en-2210.docx 27