Fastening Option; Prepare Measurement; Switch On; Activate Display With Activated Energy Saving Options - sauter FS Series Manual

8.4 Fastening option

The unit can be attached to test stands, fixtures and handholds (AFK 02 is available
as an option) using M3 screws at the four threaded holes on the rear:

9 Prepare measurement

9.1 Switch on

Press and hold the ON/OFF button for approx. 3 sec.

9.2 Activate display with activated energy saving options

If you have activated the energy-saving mode of the display as described in section
11.1.3 it is possible that your unit is switched on and only the display is switched off.
To activate the display, briefly press the START/STOP key or touch the display. If the
display cannot be activated, start the machine as described in section 9.1 described.
12 FS-BA-en-2210.docx