Page 1
Sauter GmbH Ziegelei 1 Tel: +49-[0]7433- 9933-199 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@sauter.eu Internet: www.sauter.eu Instruction Manual Mechanical Force Gauge SAUTER FA Version 1.3 11/2016 FA-BA-e-1613...
Page 2
Version 1.3 11/2016 Instruction Manual Mechanical Force Gauge Thank you for buying this mechanical force gauge of SAUTER. We hope you are pleased with your high quality force gauge with its functional range. If you have any queries, wishes or helpful suggestions, do not hesitate to call our service number.
1 Scope of delivery SAUTER FA Transport case Standard attachments, as shown beside Direction (Pull) Turnable display Drag indicator Switch Track / Peak Direction (Push) Force Sensor Explanation: Track = continuous measuring Peak = Capture of the Maximum value 2 Working Conditions Working temperature: 10°C to 30°C...
Advice: When the force gauge is not in use, leave it in Peak position; this will extend life of the spring measurement system. 5 Adaptation to Test Stands Onto all SAUTER test stands with four M3 screws. For mounting, the backside hous- ing will have to be removed. 6 Drawings...
Page 5
- The instrument may only be used in compliance with the described guidelines. - Varying ranges of applications or planned use must be approved by SAUTER in writing. FA-BA-e-1613...
Page 6
For this purpose, the responsible user must define a suitable interval as well as the nature and scope of this inspection. Information is available on SAUTER home page (www.sauter.eu) concerning the monitoring of instrument test substances and the test weights required for this.