Introduction; Check Before Use; Intended Use; Warnings - sauter FS Series Manual

1 Introduction

Read these operating instructions carefully before commissioning, even if you already
have experience with SAUTER measuring devices.
SAUTER offers the software and accessories as an option to make the measuring
device more versatile in use. Please enquire with SAUTER or your SAUTER dealer or
visit our website at

2 Check before use

After receiving the unit, check in advance whether there has been any transport
damage, whether the outer packaging, the plastic housing, other parts or even the unit
itself has been damaged. If any damage is apparent, please notify the specialist dealer
or manufacturer immediately.

3 Intended use

The SAUTER FS device is intended for measuring forces and torques in industrial
environments.

4 Warnings

4.1 Transport

A lithium-ion battery is built into the unit. The technical data of the battery is described
in chapter 8.1 is described. Observe the national and international transport regulations
for devices with a permanently installed lithium-ion battery.

4.2 Electrostatic sensitive device

The unit can be destroyed by electrostatic discharges. Connectors for
HF signals are particularly at risk. Please observe the handling
instructions for electrostatically sensitive components.
FS-BA-en-2210.docx
www.sauter.eu.
5