Adjust And Calibrate; Additional Sensors - sauter FS Series Manual

Table of Contents

FS 402

FS 403

FS 404

FS 405

FS 406

FS 407

FS 408

13.2.1 Adjust and calibrate

In order to adjust and calibrate the entire measuring chain, a measuring

device and sensor are required in the core laboratory! Your QM

representative can provide you with information on the period in which

recalibration is necessary. In any case, we recommend a DAkks calibration certificate

for every new device and sensor.

If you purchase sensors for your device at a later date, it is necessary to send the

device to the KERN laboratory, as the entire measuring chain is required for adjustment

and calibration.

Check which other sensors in your range currently need recalibration or will need it in

the foreseeable future and send them together to the KERN laboratory to minimise

freight costs and downtime. Observe the national and international transport

regulations for devices with permanently installed lithium-ion batteries.