Heartland VALUE Series Assembly Manual page 78

• Use acrylic latex caulk that is paintable. Caulk at all horizontal and vertical seams, between the trim and walls, and all
around the door trim.
• Use a high quality exterior acrylic latex paint. When painting your building, there are a few key areas that can be easily
overlooked that must be painted:
• Bottom edge of all siding and trim
• Inside of doors and all 4 edges
Note:
Prime all un-primed exterior wood before painting.
(Follow directions provided by manufacturer.)
• Install felt flush to all roof edges overlapping 3". Use minimal amount of roofing nails to hold in place.
Drip edge is only installed on the front and back sides of this shed.
• Install over roof felt or over roof deck.
• Do not use nails on side of drip edge that hangs over side of building.
• Only nail top of drip edge as shown.
Roof Felt
Drip Edge
No drip edge on sides.
PAINT & CAULK
- NOT INCLUDED -
ROOF FELT
- NOT INCLUDED -
Flush
Flush
DRIP EDGE
- NOT INCLUDED -
Start here.
NOTE: 10' x 12' Model Shown.
76
OK to overlap at ridge.
3" OVERLAP
Snip bottom side of drip edge and
bend over to other side of roof.
(Follow directions provided by manufacturer.)
Edge fush
to trim.