Heartland VALUE Series Assembly Manual page 48

PARTS REQUIRED:
x2 x1
BEGIN
Orient parts QL on the flat side, as shown.
1
Measure and mark the center of the middle gable panel. Secure with 1-1/2" nails spaced 6" apart along edge.
Place end panels on QL flush to installed panel and secure with 1-1/2" nails spaced 6" apart along edge.
2
Repeat STEP 2 for right panel.
Repeat STEPS 1 - 3 for front gable panels.
1-3/4"
(4,4 cm)
QL
1-1/2"
(3,8 cm)
1-3/4"
(4,4 cm)
QL
1-1/2"
(3,8 cm)
FINISH
Your gable units are now assembled.
GABLE PANELS
x1 x2
Install gable panels with the primed side facing up.
1-3/4"
(4,4 cm)
1-1/2" (3,8 cm)
Nails
6"
(15,2 cm)
1-3/4"
(4,4 cm)
1-1/2" (3,8 cm)
Nails
6"
(15,2 cm)
x48
x4 QL
2 x 4 x 39" (5,1 x 10,2 x 99,1 cm)
Flush Flush
Mark
Flush Flush
Mark
46
1-1/2" (3,8cm)
1-1/2" (3,8 cm)
Nails
6"
(15,2 cm)
1-1/2" (3,8 cm)
Nails
6"
(15,2 cm)