Heartland VALUE Series Assembly Manual page 69

PARTS REQUIRED:
x1 OO
TEMPORARY SUPPORT
69" (175,3 cm) Door Stiffener
Install OO flush under panels.
2
Secure to floor frame with (2) 3" screws (Fig. A) .
Mark center of door opening.
Fig. A
Center doors on mark (Fig. B).
3
Screw hinge boards into wall supports with (10) 3" screws, as shown.
4
Make sure screws go into framing .
Center 3/8" measurement
on mark.
Fig. B
3/8"
(1 cm)
Remove temporary supports and check to make sure doors open and close properly.
FINISH
Your doors are now installed.
DOORS
Flush
against wall panels
OO
x12
OO
TEMPORARY SUPPORT
67
3" (7,6 cm)
(2) 3" (7,6 cm) Screws
(5) 3" (7,6 cm)
Screws
in door stud