Heartland VALUE Series Assembly Manual page 63

PARTS REQUIRED:
x8
3/8" x 1-3/4" x 83-1/4" (1 x 4,5 x 211,5 cm)
BEGIN
Install gable end 83-1/4" corner trim under gable panel, (Fig. A) and flush to eave wall panel (Fig. B).
1
Secure with 2" finishing nails spaced evenly.
Install eave side 83-1/4" corner trim flush to eave soffit and flush along seam of installed corner trim
2
(Fig. C). Secure with 2" finishing nails spaced evenly.
Flush to
roof panel
Fig. C
Repeat STEPS 1 - 2 for each corner of shed.
FINISH
Your corner trim is now installed.
CORNER TRIM
Fig. A
Flush to
gable panel
10-3/4"
(27,3 cm)
2" (5,1 cm)
Finishing Nails
Seam is fush.
Caulk seam before
painting trim.
x64
NOTE: 10' x 10' Model Shown.
61
2" (5,1 cm)
Fig. B
Flush to
eave panel
83-1/4"
(211,5 cm)
83-1/4"
(211,5 cm)