Heartland VALUE Series Assembly Manual page 11

If you choose to install your kit on a concrete slab refer to the diagram below.
Attach the sill plates on the foundaton as shown, and continue on to page 14.
C B
C
(10,2 cm)
Building Size
10'x10' (304,8 x 304,8 cm)
10' x 10' Building Requires:
x2
2 x 4 x 10' (5,1 x 10,2 x 304,8 cm)
x1
Caulk
Building Size
10'x14' (304,8 x 408,9 cm)
10' x 14' Building Requires:
x2
2 x 4 x 10' (5,1 x 10,2 x 304,8 cm)
x1
Caulk
Building Size
10'x18' (304,8 x 548,6 cm)
10' x 18' Building Requires:
x4
2 x 4 x 10' (5,1 x 10,2 x 304,8 cm)
x1
Caulk
Allow new concrete slabs to cure for at least seven (7) days.
• A treated 2x4 (5,1 x 10,2 cm) sill plate is required when installing your shed on concrete.
Purchase full length treated lumber, or butt shorter pieces end-to-end and seal seams with caulk.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2x4 (5,1 x 10,2 cm) sill plates to slab using approved concrete anchors (fasteners not included).
• Check local code for concrete foundation requirements.
CONCRETE FOUNDATION
B
4"
Actual Floor Size
10'x10' (304,8 x 304,8 cm)
Actual Floor Size
10' x 14' (304,8 x 408,9 cm)
Actual Floor Size
10' x 18' (304,8 x 548,6 cm)
D
D
D
D
3-1/2"
(8,9 cm)
Sill plates must be treated lumber.
B
A
120" (304,8 cm) 113" (287 cm)
x2
2 x 4 x 10' (5,1 x 10,2 x 287 cm)
Cut down to: 113" (278 cm)
B
A
120" (304,8 cm) 161" (408,9 cm)
x2
2 x 4 x 14' (5,1 x 10,2 x 426,7 cm)
Cut down to: 161" (408,9 cm)
A B
120" (304,8 cm) 209" (530,9 cm)
x2
2 x 4 x 8' (5,1 x 10,2 x 243,8 cm)
Cut down to: 89" (226,1 cm)
9
Treated Sill Plate
Caulk between
sill plate and
concrete.
A
A
A
C
120" (304,8 cm) 169-11/16" (476,1 cm)
C
168" (426,7 cm) 206-7/16" (524,4 cm)
C
216" (548,6 cm) 247-1/8" (627,7 cm)
D
D
D