Heartland VALUE Series Assembly Manual page 76

PARTS REQUIRED:
x4
KX
19/32" x 2-1/2" X 21-3/4"(1,6 x 7,6 x 55,2 cm)
BEGIN
Center window in front gable as shown and secure with 3/4" screws
1
Seal back of window with high-quality paintable exterior caulk before installing.
2 Install (4) window trim KX centered over window.
Secure with 3/4" screws and 2" finishing nails, as shown.
Do not screw or nail into frame of window.
Snip off protruding nails from inside.
FINISH
Your gable window and trim are now installed.
GABLE WINDOW
x1
Outside View
3/4" Screws x8
(1,9 cm)
Center
x14
3/4" Screws x4
(1,9 cm)
Level
KX x 4
2" Finishing Nails x14
3/16" (4,8 mm)
Approx. overhang at each corner
Center
74
x12
2" (5,1 cm)
(5,1 cm)
3/4" (1,9 cm)