Heartland VALUE Series Assembly Manual page 65

PARTS REQUIRED:
x4 RL
2 x 4 x 24" (5,1 x 10,2 x 61 cm)
x4
TP
2 x 4 x 96" (5,1 x 10,2 x 243,8 cm)
¸
BEGIN
1 Orient parts TP and RL on a flat surface.
Hold parts TP and RL flush and aligned.
Assemble joist with 3" nails in a staggered pattern.
RL
2
Turn assembled joist over and repeat staggered nail pattern.
3
Support joist and drill a 7/16" hole through each end (Fig. A).
Repeat steps to build a second loft joist.
FINISH
Your loft joists are now assembled.
LOFT JOISTS
TP
Flush
Flush
x48
7/16" (11 mm) Drill Bit
RL
TP
3" (7,6 cm)
Nails
Flush
1-3/4"
(4,4 cm)
1-3/4"
(4,4 cm)
Fig. A
63
3" (7,6 cm)
Flush