Calibration Connectors (Ports 1 To 8) - Keysight Technologies S9100A Startup Manual

7 Run Power Calibration

7. 2. 1 Calibration Connectors (Ports 1 to 8)

The S9100A system is available in three standard configurations with multiple ports:
S9100A Option RH1 5G Multi-Band Vector Transceiver
Port Selection
RRH 1 RFHD 1 ->
RRH 1 RFHD 2
RRH 1 RFHD 2 ->
RRH 1 RFHD 1
RF Output -> RF Input
62
Hardware Calibration Paths... Ports
M1740A Port 1 -> 2 1, 2
M1740A Port 2 -> 1 2, 1
RF Transceiver ...without a Blocker 3, 4
If calibration is
required for ports
RF Output ->
or
RF Input
,
IFIO 1 -> IFIO 1
contact
Keysight Support;
see Returning for
Service on page 18.
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
S9100A Option 007 mmWave Transceiver with High IF
Port Selection Hardware Calibration Paths...
RRH 1 RFHD 1 ->
M1740A Port 1 -> 2
RRH 1 RFHD 2
RRH 1 RFHD 2 ->
M1740A Port 2 -> 1
RRH 1 RFHD 1
RF Output -> RF Input RF Transceiver ...without a Blocker
IFIO 1 -> IFIO 1
High IF (E7770A w/ DUT IF Channel Card)
S9100A Option 022 mmWave Transceiver w/ High IF and Blocker
Port Selection Hardware Calibration Paths...
RRH 1 RFHD 1 ->
M1740A Port 1 -> 2
RRH 1 RFHD 2
RRH 1 RFHD 2 ->
M1740A Port 2 -> 1
RRH 1 RFHD 1
RF Output -> RF Input RF Transceiver ...combined with a Blocker
IFIO 1 -> IFIO 1
High IF (E7770A w/ DUT IF Channel Card)
Ports
1, 2
2, 1
3, 4
7, 8
Ports
1, 2
2, 1
5, 6
7, 8