Power Calibration Connectors (Ports 1 To 6) - Keysight Technologies S9101A Startup Manual

7 Run Power Calibration

7. 3 Power Calibration Connectors (Ports 1 to 6)

The S9101A system is available in three standard configurations with multiple ports:
S9101A-TR1 5G Multi-Band Vector Transceiver
Port Selection
RRH 1 RFHD 1 ->
RRH 1 RFHD 2
RRH 1 RFHD 2 ->
RRH 1 RFHD 1
RF Output -> RF Input
S9101A-BK1 5G Multi-Band Vector Transceiver TR1 with Blocker
Port Selection
RRH 1 RFHD 1 ->
RRH 1 RFHD 2
RRH 1 RFHD 2 ->
RRH 1 RFHD 1
RF Output -> RF Input
54
Hardware Calibration Paths... Ports
RRH 1 RFHD 1 -> RRH 1 RFHD 2 1, 2
RRH 1 RFHD 2 -> RRH 1 RFHD 1 2, 1
RF Transceiver 3, 4
Hardware Calibration Paths... Ports
RRH 1 RFHD 1 -> RRH 1 RFHD 2 1, 2
RRH 1 RFHD 2 -> RRH 1 RFHD 1 2, 1
RF Transceiver with a Blocker 5, 6
S9101A 5G Multi-Band Vector Transceiver, Startup Guide
S9101A-TR2 5G Multi-Band Vector Transceiver
Port Selection Hardware Calibration Paths...
RRH 1 RFHD 1 ->
RRH 1 RFHD 1 -> RRH 1 RFHD 2
RRH 1 RFHD 2
RRH 1 RFHD 2 ->
RRH 1 RFHD 2 -> RRH 1 RFHD 1
RRH 1 RFHD 1
RF Output -> RF Input
RF Transceiver 1
RRH 1 RFHD 1 -> RRH 1 RFHD 1 -> RRH 1 RFHD 2
RRH 1 RFHD 2
RRH 1 RFHD 2 -> RRH 1 RFHD 2 -> RRH 1 RFHD 1
RRH 1 RFHD 1
RF Output -> RF Input RF Transceiver 2
If calibration is
required for ports
RF Output ->
RF Input
Keysight Support;
see Returning for
Service on page 18.
Ports
1, 2
2, 1
3, 4
1, 2
2, 1
3, 4
, contact