S9106Ac-2If: Detailed Steps To Verify Operation; Connect Ac Power Cords & Power On Equipment; Connect Ac Power Cords & Power On Equipment On Page; Verify X-Apps Controls S9106Ac-2If Rf Ports At 3 Ghz On Page - Keysight Technologies S9106AC-42D Startup Manual

6 Verify Operation

6. 1 S9106AC-2IF: Detailed Steps to Verify Operation

1. Connect AC Power Cords & Power On Equipment on page 54
2. Verify X-Apps Controls S9106AC-2IF RF Ports at 3 GHz on page 55
3. Verify X-Apps Controls S9106AC-2IF High IF Ports at 10 GHz on page 59
6. 1. 1 Connect AC Power Cords & Power On Equipment
1. Connect an AC Power Cord to the E7770A CIU right-rear panel.
2. Power on the E7770A CIU Rear Mains Switch, located on the right-rear panel.
3. Power on the E7770A CIU AC Power Switch, located on the left-front panel.
4. Connect an AC Power Cord to the S9106AC Base System right-rear panel.
5. Power on the S9106AC-2IF AC Power Switch, located on the left-front panel.
The M9037A PXIe Embedded Controller and the M9300A PXIe Reference are
part of the S9106AC Base System; they both power on and initialize
automatically when the S9106AC Base System is powered on.
54 S9106AC-2IF, -4UP, and -42D 5G FR1 Multi-port Transceiver Solutions, Startup Guide