Connectors, E7770A Ciu, Channel Card - Keysight Technologies S9100A Startup Manual

3 Review Hardware Components
3. 2. 6. 3 Connectors, E7770A CIU, Channel Card
The Channel Card provides connectivity between the test system hardware and
(depending on the configuration) the IF interface on the device under test (DUT).
See Install Hardware on page 37
and Channel Card equipped with IF circuitry.
Configurations using a Channel Card - No DUT IF;
IF connectors do not function and only LO In is used:
Configurations using a Channel Card equipped with IF circuitry;
IF connectors do function and also use LO In:
30
for configurations using Channel Card - No DUT IF
IF In A
Connector Type-N (f), 50 Ω, nominal
DL IF input Channel A.
DUT IF In/Out A
Connector SMA (f), 50 Ω, nominal
In/Out connection for Channel A.
IF Out A
Connector Type-N (f), 50 Ω, nominal
UL IF output for Channel A.
LO In
Connector SMA (f), 50 Ω, nominal
Local oscillator input for the Channel Card.
IF In B
Connector Type-N (f), 50 Ω, nominal
DL IF input for Channel B.
DUT IF In/Out B
Connector SMA (f), 50 Ω, nominal
In/Out connection for Channel B.
IF Out B
Connector Type-N (f), 50 Ω, nominal
UL IF output for Channel B.
S9100A 5G Multi-Band Vector Transceiver, Startup Guide