Table of Contents
Advertisement
3. 2. 5 Connectors, S9100A Rear Panel (M9019A PXIe Chassis)
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
AC Line Input
(Use the AC line cord supplied with the S9100A.)
Connector, Three-Prong
POWER SYNC
(DO NOT CONNECT TO LAN!)
Connector, IN and OUT
FAN and INHIBIT Switches
(Used for remote inhibit and power rail monitoring.)
3 Review Hardware Components
100/120 V, 50/60 Hz,
1200 W MAX (Lower range)
220/240 V, 50/60 Hz,
1300 W MAX (Upper range)
See also
AC Power
Cord on page 14.
RJ-45 cables (CAT5 or better not exceeding
two meters in length) can be used to connect
multiple PXI chassis; up to four chassis may
be connected together for power-up syn-
chronization. DO NOT connect to the LAN!
When connected with RJ-45 cables, the
power button on any chassis may be used to
power up or power down the entire system.
25
Advertisement
Table of Contents
