1 Overview
The Keysight S9100A 5G Multi-Band Vector Transceiver
is a streamlined, non-signaling measurement system that enables automated testing
of 5G New Radio (5G NR) infrastructure equipment in both the FR1 (380 MHz to 6 GHz)
and millimeter wave FR2 (24.25 to 43.5 GHz) frequencies.
In this document...
This document describes the installation process to start up and prepare the
Keysight S9100A 5G Multi-Band Vector Transceiver for use.
1. Review this Overview
2.
Review Safety Requirements on page 3
3.
Review Hardware Components on page 19
4.
Install Hardware on page 37
5.
Install Software on page 49
6.
Verify Operation on page 51
7.
Run Power Calibration on page 59
8. Reference of
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
S910xA SCPI Programming Commands on page 91
1 Overview
1