Verify The X-Apps Software Controls The S9100A At 28 Ghz - Keysight Technologies S9100A Startup Manual

6 Verify Operation

6. 1. 2 Verify the X-Apps Software Controls the S9100A at 28 GHz

1. Connect a loop-back cable from RF Tx/Rx 1 to RF Tx/Rx 2 connectors on the
M1740A mmWave Transceiver. One 8121-3222 loop-back cable, 2.4 mm (m) to
2.4 mm (m), 152.4 mm (6.0 in), is included with each S9100A.
2. Set the RF Tx/Rx 2 (Head 1 RFHD 2) to 28 GHz; this port can be thought of as
the RF Input (Receiver or Analyzer port) on the M1740A mmWave Transceiver.
56
a. Select the drop-down menu panel (top-right corner)
and select Input/Output, select the Input tab,
select the RF Input Port drop-down menu, and set it to Head 1 RFHD 2.
b. Select the drop-down menu panel (top-right corner)
select Frequency, select the Center Frequency entry box,
and set it to 28 GHz.
c. Leave all of the other Input port settings in their preset state.
S9100A 5G Multi-Band Vector Transceiver, Startup Guide