Table of Contents
Advertisement
2 Review Safety Requirements
2. 10 Power Requirements
100/120 VAC, 220/240 VAC
50/60 Hz
1200 W Max (Lower range), 1300 W Max (Upper range)
The Keysight S9100A Base System does not contain customer serviceable fuses, but
the E7770A CIU fuse can be replaced. See Fuse Replacement for the E7770A
Common Interface Unit (CIU); additional servicing information may also be available in
the E7770A Common Interface Unit (CIU), User's Guide E7770-90001.
12
"WARNING: Safety of any system incorporating the equipment is
the responsibility of the assembler of the system."
Failure to ground the test set properly can result in personal
injury. Before turning on the test set, you must connect its
protective earth terminals to the protective conductor of the main
power cable. Insert the main power cable plug into a socket outlet
that has a protective earth contact only. DO NOT defeat the earth-
grounding protection by using an extension cable, power cable, or
auto-transformer without a protective ground conductor.
This instrument has auto-ranging line voltage input. Before
switching on the instrument, be sure the supply voltage is within
the specified range and voltage fluctuations do not exceed 10
percent of the nominal supply voltage.
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
Advertisement
Table of Contents
