Table of Contents
Advertisement
4 Install Hardware
4. 1 Standard Configurations
The S9100A is available in three standard configurations:
Keysight S9100A Option RH1 5G Multi-Band Vector Transceiver
one-channel configuration, consists of one RF transceiver and one mmWave
transceiver providing one Tx channel and one Rx channel, operating in one
frequency range at a time:
Keysight S9100A Option 007 mmWave Transceiver with High IF (Dual-
Use Configuration:
configuration, consists of one RF transceiver, one mmWave transceiver, as well
as one High IF Channel Card in the E7770A Common Interface Unit (CIU)
providing one Tx channel and one Rx channel, operating in one frequency range
at a time:
High IF frequencies are provided by using additional High IF input & output
connectors that route the signal path through up and down converters, located
on a Channel Card, in the Keysight E7770A Common Interface Unit (CIU).
Keysight S9100A Option 022 mmWave Transceiver with High IF and Blocker
(Dual-Use Configuration:
configuration, consists of two RF transceivers, one mmWave transceiver, as
well as one High IF Channel Card (in the E7770A Common Interface Unit)
providing one Tx channel and one Rx channel, operating in one frequency range
at a time:
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
Before installing hardware,
Requirements on page 3.
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
High IF and mmWave) on page 42, one-channel
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
or High IF frequencies ranging from 6 to 12 GHz
High IF and mmWave) on page 45, one-channel
FR1 frequencies ranging from 380 MHz to 6 GHz
or FR2 banded mmWave frequencies from 24.25 to 43.5 GHz
or High IF frequencies ranging from 6 to 12 GHz
Review Safety
4 Install Hardware
on page 39,
37
Advertisement
Table of Contents
