Connectors, E7770A Ciu Rear Panel, Controller Card - Keysight Technologies S9100A Startup Manual

3 Review Hardware Components
3. 2. 6. 6 Connectors, E7770A CIU Rear Panel, Controller Card
Each E7770A CIU contains a single CONTROLLER CARD. The status of the
E7770A CIU is identified using the status lights on the CONTROLLER CARD.
32
Status LEDs
Top Left LED, Green
Top Right LED, Green
Bottom Left LED, Red
Bottom Right LED, Green On, indicates configured okay.
USB
Connector
CONTROL (LAN)
Connector
TRIG 1
Connector
Input Level Range
TRIG 2
Connector
Input Level Range
TRIG 3
Connector
Input Level Range
TRIG 4
Connector
Input Level Range
Ctrl 1
Connector
Ctrl 2
Connector
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
On, indicates +12 V supply if okay.
On, indicates configured okay.
Not used.
Micro-USB B
Reserved for Keysight internal use only.
10/100/1000BASE-T
(RJ-45) Gigabit Ethernet Port
BNC (f), 50 Ω, nominal
5 V TTL (Trigger signal below 0.8 volts is a
"zero" (low) and anything above +2.4 volts is a
"one" (high).
BNC (f), 50 Ω, nominal
5 V TTL (See description for TRIG 1.)
BNC (f), 50 Ω, nominal
5 V TTL (See description for TRIG 1.)
BNC (f), 50 Ω, nominal
5 V TTL (See description for TRIG 1.)
Micro-HDMI
Reserved for Keysight internal use only.
Micro-HDMI
Reserved for Keysight internal use only.