Table of Contents
Advertisement
3. 2. 6. 4 Connectors, E7770A CIU Rear Panel
The rear panel of the E7770A CIU contains rear connections for the
CONTROLLER CARD and all installed Channel Cards; if there is only one installed
Channel Card, only rear panel connectors for CHANNEL 1A and CHANNEL 1B are
usable. The rear panel of the E7770A CIU is also labeled with all required safety and
compliance indicators and contains the Mains switch where the AC power cable is
connected. Since the LO Card and the LO Distribution Card do not extend through to
the rear panel, there are no rear connections for the LO Card or LO Distribution Card.
3. 2. 6. 5 Connectors, E7770A CIU Rear Panel, Channel Cards
The E7770A CIU rear panel contains the connectors for up to eight Channel Cards;
each rear panel Channel Card (labeled: 1A, 1B, 2A, 2B, 3A, 3B, 4A, 4B) corresponds to
a Channel Card available from the front of the E7770A CIU.
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
LO/CTRL/PWR
Connector
TNC (f), 50 Ω, nominal
Local oscillator, control, and power from
LO/CTRL/PWR
Frequency,
6 to 12 GHz,
LO Power
10 dBm, minimum
DC Power
+36 VDC, 1A
DUT IF IN HEAD IN
Connector
Type-N (f), 50 Ω, nominal
Output for connecting to DUT for High IF testing.
DUT IF OUT HEAD OUT
Connector
Type-N (f), 50 Ω, nominal
Input for connecting to DUT for High IF testing.
3 Review Hardware Components
31
Advertisement
Table of Contents
