Connectors, E7770A Ciu, Lo Distribution Card - Keysight Technologies S9100A Startup Manual

3. 2. 6. 2 Connectors, E7770A CIU, LO Distribution Card
The LO Distribution Card distributes the LO signal, from the LO Card,
to Channel Cards. It can also be used to send LO signals to multiple E7770A CIUs or
to configure two different local oscillators on the same E7770A CIU.
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
LO In
Connector SMA (f), 50 Ω, nominal
LO Card LO Aux Out to LO Distribution Card LO In.
See Install
LO Out 1
Connector SMA (f), 50 Ω, nominal
LO Distribution Card LO Out 1 to Channel Card 1 LO In.
LO Out 2
Connector SMA (f), 50 Ω, nominal
LO Distribution Card LO Out 2 to Channel Card 2 LO In.
LO Out 3
Connector SMA (f), 50 Ω, nominal
LO Distribution Card LO Out 3 to Channel Card 3 LO In.
LO Out 4
Connector SMA (f), 50 Ω, nominal
LO Distribution Card LO Out 4 to Channel Card 4 LO In.
LO Aux In
Connector SMA (f), 50 Ω, nominal
Auxiliary input source from the LO Card LO Out used
for configuring two different local oscillator sources.
LO Aux 1
Connector SMA (f), 50 Ω, nominal
Auxiliary local oscillator output 1.
LO Aux 2
Connector SMA (f), 50 Ω, nominal
Auxiliary local oscillator output 2.
LO Aux 3
Connector SMA (f), 50 Ω, nominal
Auxiliary local oscillator output 3.
LO Aux 4
Connector SMA (f), 50 Ω, nominal
Auxiliary local oscillator output 4.
LO In 2
Connector SMA (f), 50 Ω, nominal
Input source used in configurations with multiple
E7770A CIUs; this connection would be from the
LO Card LO Out of a second E7770A CIU.
3 Review Hardware Components
Hardware on page 37.
29