Table of Contents
Advertisement
3 Review Hardware Components
3. 2. 7. 2 Connectors, mmWave Side of M1740A mmWave Transceiver
34
USB
Connector
Aux
Connector
RF Tx/Rx 1
Connector
Frequency, M1740A
Frequency, S9100A
Amplitude
RF Tx/Rx 2
Connector
Frequency, M1740A
Frequency, S9100A
Amplitude
Although the M1740A mmWave Transceiver is operational from
24 to 44 GHz, the performance information for the S9100A is only
provided for the frequency bands called out in its Data Sheet.
See the Data Sheet for the
S9100A 5G Multi-Band Vector Transceiver, Startup Guide
Micro-USB B
Reserved for Keysight internal use only.
Micro-D 15-pin
A power input (used by Keysight in testing;
not needed for customer use).
2.4 mm (f), 50 Ω, nominal
This port can be configured either to supply a
mmWave signal to a Device Under Test (DUT),
or to receive a mmWave signal from a DUT.
24 to 44 GHz,
24.25 to 29.5 GHz and 37 to 40 GHz,
15 VDC, +20 dBm Maximum Input
2.4 mm (f), 50 Ω, nominal
This port can be configured either to supply a
mmWave signal to a Device Under Test (DUT),
or to receive a mmWave signal from a DUT.
24 to 44 GHz,
24.25 to 29.5 GHz and 37 to 40 GHz,
15 VDC, +20 dBm Maximum Input
Keysight S9100A,
5992-3561EN.
Advertisement
Table of Contents
