Figure 16: CAT6/7 Wifidog Settings
6.6 Configure Connection Mode / Connection Settings
You can set the CPE to connect to the default network automatically or you can connect manually, where
you have to select the network you want to connect to each time.
1. In the CAT4 GUI, go to LTE > Connection Mode, and in the CAT6/7 GUI, go to LTE > Connection
Settings to choose Automatic (CAT4)/Always On (CAT6/7) or Manual (Figure 17). If you choose
Automatic (CAT4) or Always On (CAT6/7), click on SAVE/APPLY (CAT4) or Apply (CAT6) to save your
selection. If you choose Manual, go to
step
2.
20