Table of Contents
Advertisement
To set up WLAN for CAT6/7:
1. Ensure that the computer or other smart device connecting to the CPE has WLAN/Wi-Fi enabled.
When the Wi-Fi LED on the unit shows "steady on", per Table 2 LEDs, it is functional.
2. In the GUI, go to Network > WLAN Settings to enable the WiFi setting (Figure 14).
3. To avoid unauthorized use of the Wi-Fi/WLAN, enter a unique access password. Refer to the
CPE Configuration Guide
Figure 13: CAT4 WLAN Settings
for a description of all the settings.
16
Advertisement
Table of Contents
