Table of Contents
Advertisement
LED
Description
LAN (on back)
Ethernet indicator
Table 3: Interfaces
Interfaces vary by model; not all models will have all of the interfaces listed.
Interfaces
USIM
LAN
RESET
DC-5V Power Connector
Power Switch
POTS-RJ11
(Atom ID06-6.5 only)
5 Installation
The steps for installing the unit are provided below.
ATTENTION: Never power on the unit while installing or uninstalling the USIM card. Doing so
could damage the card and the unit.
Insert the USIM card: Open the protective cover of the USIM card slot on the top of the Atom
1.
unit and insert the USIM card into the slot (Figure 4). Close the cover.
Figure 4: Insert USIM Card
Status
Off
Steady on
Blinking
Description
Universal Subscriber Identity Module card slot. 1.8 V/3.0 V USIM 2FF
One to four RJ-45 ports, LAN, 10/100 (CAT4) or 10/100/100 (CAT6/7) auto-
sensing, auto-MDX interface to connect to computer or other network devices
(e.g., hub or switch). Compatible with IEEE 802.3/802.3u standards.
Press the reset button for one second to reset the unit. Press the reset button for
10 seconds to restore the unit to its factory settings.
Port to attach the power adaptor provided with the unit
Power on/off
RJ-11 telephone port(s). Used for phone/fax/POS, providing VoIP functions under
conditions of software support.
4
Meaning
No Ethernet connection
Ethernet connection is normal
Ethernet data is being transmitted
Advertisement
Table of Contents
