Table of Contents
Advertisement
About This Document
This document is intended for installers and subscribers setting up and operating the Baicells Atom ID0406-
6.5* Customer Premise Equipment (CPE), aka User Equipment (UE). This Atom unit provides a way for
users to connect to the Internet through broadband wireless access to Long-Term Evolution (LTE) backhaul
networks. The information covers how to install, configure basic settings, monitor, and perform basic
maintenance and troubleshooting for the indoor CPE. If you are using a Baicells outdoor CPE, please refer
to the
Atom OD0406 Outdoor Low-Gain & High-Gain CPE User
*NOTE: "ID" stands for indoor. The "04" designation stands for CAT4, and "06" stands for CAT6. These
categories are related to the LTE standards requirements for user equipment. Model numbers are shown in
the product datasheets, which can be found at Baicells.com > Resources > Documents.
Terms used in this document or related to LTE are listed in alphabetical order and described in
and
Abbreviations, which can be found at Baicells.com > Resources > Documents.
New in This Release
The following updates have been provided in this release:
Updates reflect changes to new software BG 1.6.20.
•
•
Added NAT mode configuration option in
•
Added WLAN description and steps in
Added Wifidog description and steps in
•
•
Updated MTU range in
•
Updated the Spectrum Access System (SAS) information in
Copyright Notice
Baicells Technologies, Inc., copyrights the information in this document. No part of this document may be
reproduced in any form or means without the prior written consent of Baicells Technologies, Inc.
Disclaimer
The information in this document is subject to change at any time without notice. For more information,
please consult with a Baicells technical engineer or the support team. Refer to the "Contact Us" section
below.
section
section
6.4.
section
section 6.8.2, step
4.
ii
Manual.
6.3.2.
6.5.
section
6.9.
Acronyms
Advertisement
Table of Contents
