Configure Local Epc Apn; Figure 25: Apn Management / Edit Apn Profile - Baicells Atom ID0406-6.5 User Manual

Indoor cpe

Hide thumbs Also See for Atom ID0406-6.5:

Table of Contents

6.8.2 Configure Local EPC APN

In a Local EPC network setup, follow the steps below to configure an APN on a CAT4 or CAT6/7 CPE.

1. In the CAT4 GUI go to LTE > APN Management, and in the CAT6/7 GUI go to LTE > Edit APN Profile

(Figure 25).

2. Select an APN number, which is just an index to separate the different APN profiles.

3. Enable the APN profile, and give it a name.

4. In CAT4, enter the Maximum Transmission Unit (MTU) packet size that can be sent on this APN.

The range is 576-1500 bytes.

NOTE: For CAT6/7, the MTU setting is in the LTE > MTU menu and the MTU range is 1280-1500 bytes.

5. In CAT4, if you want this APN profile to be the default gateway, select the Default checkbox.

6. In CAT4, you can select a protocol to use: No Specified, TR069, SNMP, SNMP+TR069.*

7. In CAT6/7, for security you can enter a username and password, and set the Auth Type. The

choices for the authorization/encryption protocol are NULL, AUTO, CHAP, or PAP.

8. SAVE & APPLY (CAT4) or Apply (CAT6) the settings.

Table of Contents