Configure Quick Settings - Baicells Nova230i Installation Manual

Nova230i Outdoor 2x500 mW eNodeB Installation Guide
Field Name
TR069 Binding
SNMP Agent Configuration
SNMP Version
System Name
SNMP Port
Contact
Location
Community String
Source
Trap Agent Configuration
Trap Community String
Trap Server

3.7.6 Configure Quick Settings

Under the Basic Setting > Quick Setting window (Figure 3-21) are several important fields you must
configure and/or verify. First, if the operator is using the Baicells CloudCore EPC, you must enter a
fixed Public Land Mobile Network (PLMN) and MME IP address:
• PLMN = 314030
MME IP = 10.3.0.9 and 10.5.0.9
•
Do not change these settings except when connecting to a Local (private network) EPC or different
vendor's EPC. Second, you must enter the operator's planned settings for Band, Bandwidth,
EARFCN, Cell ID, PCI, TAC, etc. Some Quick Setting fields such as Duplex Mode and Frequency will
auto-fill based on the eNB hardware model. Make sure the Cloud EPC field is set to ON when using
the Baicells CloudCore. If you are testing the eNB in a lab environment, turn the power down as
low as it will go under the Power Modify field.
Description
The interface binding with TR069 protocol. Default is WAN.
The current supported SNMP version, which is generated automatically and
is SNMP v2c.
The community name, which is generated automatically.
The SNMP protocol port used. Range is 0–65535.
The contact email. Range is 0–256 characters (using upper-case letters A–Z,
lower-case letters a–z, and digits 0–9).
' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,"
The system's location. Range is 0–256 characters (using upper-case letters
A–Z, lower-case letters a–z, and digits 0–9).
' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,".
Used to define a community. Default is public. Range is 0–256 characters
(using upper-case letters A–Z, lower-case letters a–z, and digits 0–9).
' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,".
The source address of acquiring information. Default is Any.
Used to define a community. Default is secret. Range is 0–256 characters
(using upper-case letters A–Z, lower-case letters a–z, and digits 0–9).
' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,".
The IP address for the host. Range is 0–256 characters.
32