Table of Contents
Advertisement
Table 4: WAN Settings
Field Name
Description
Network or Operation Mode
WAN Interface
CAT4 only. LTE is the only option.
Network Mode or
CAT4:
Operation Mode
CAT6/7:
Manually DNS
CAT4 only. If left unchecked, the CPE will automatically search the domain name on the
first available DNS server. If checked, enter the primary and secondary DNS server IP
addresses.
Primary DNS
CAT4 only. If Manually DNS checkbox was checked, enter the primary DNS server's IP
address for the CPE to check first for domain name resolution.
Secondary DNS
CAT4 only. If Manually DNS checkbox was checked, enter the secondary DNS server's IP
address for the CPE to check after the primary DNS if the domain name was not
resolved.
*Tunnel Mode (CAT6/7 Only)
VPN Type
L2TP or GRE
NAT Support
Enable/Disable NAT on the VPN
Default Route
VPN or WAN
Host name
Optional - enter the default route name
•
NAT - Network Address Translation. Allows multiple hosts on a private network
to access the Internet using a single public IP address.
•
Bridge - The WAN port addresses will bridge to the LAN port, and the LAN port
will work in trunking mode. If you select Bridge mode, the system will prompt
you to disable L2 in the VPN > L2 menu.
•
NAT - Allows multiple hosts on a private network to access the Internet using a
single public IP address.
•
Router - The CPE will dynamically update the router tables.
•
Tunnel - The CPE will support Layer 2 Tunneling Protocol (L2TP) or Generic
Routing Encapsulation VPN mode. See field descriptions below*.
Bridge - The WAN port addresses will bridge to the LAN port, and the LAN port
•
will work in trunking mode. If you select Bridge mode, the system will prompt
you to disable L2 in the VPN > L2 menu.
Mixed Mode - Each APN gateway can be configured with a different mode,
•
either NAT or Bridge, and a different bearer type.
14
Advertisement
Table of Contents
