Table of Contents
Advertisement
Nova430i Outdoor 4x250mW Two-Carrier TDD eNodeB Installation Guide
Field Name
SNMP Agent Configuration
SNMP Version
System Name
SNMP Port
Contact
Location
Community String
Source
Trap Agent Configuration
Trap Community String
Trap Server
3.7.6 Configure Quick Settings
The Basic Setting > Quick Setting sub-menu (Figure 3-22) is used to configure important RF parameters
and connectivity to the Baicells CloudCore Evolved Packet Core (EPC). There are several important fields
you must configure and/or verify. First, if the operator is using the Baicells CloudCore EPC, you must enter
a fixed Public Land Mobile Network (PLMN) and MME IP address:
PLMN = 314030
•
MME IP = 10.3.0.9 and 10.5.0.9
•
Do not change these settings except when connecting to a Local (private network) EPC or different
vendor's EPC. Second, you must enter the operator's planned settings for Band, Bandwidth, EARFCN, Cell
ID, PCI, TAC, etc. Some Quick Setting fields such as Duplex Mode and Frequency will auto-fill based on the
eNB hardware model. Make sure the Cloud EPC field is set to ON when using the Baicells CloudCore. If you
are testing the eNB in a lab environment, turn the power down as low as it will go under the Power Modify
field.
Description
The current supported SNMP version, which is generated automatically and is
SNMP v2c.
The community name, which is automatically generated.
The SNMP protocol port used. Range is 0–65535.
The contact email. Range is 0–256 characters (using upper-case letters A–Z, lower-
case letters a–z, and digits 0–9).' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,"
The system's location. Range is 0–256 characters (using upper-case letters A–Z,
lower-case letters a–z, and digits 0–9).
' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,".
Used to define a community. Default is public. Range is 0–256 characters (using
upper-case letters A–Z, lower-case letters a–z, and digits 0–9).
' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,".
The source address of acquiring information. Default is Any.
Used to define a community. Default is secret. Range is 0–256 characters (using
upper-case letters A–Z, lower-case letters a–z, and digits 0–9).
' space ( ) + , - . / : ? _ @ string
Cannot enter the following three combinations ":=" ":+" and ":,".
The IP address for the host. Range is 0–256 characters.
32
Advertisement
Table of Contents
