6.7.3 CAT6/7
Following are the procedures for configuring Dedicated EARFCN, PCI Lock, and PCI-only Lock on a CAT6/7
CPE.
Dedicated EARFCN (Figure 22)
•
1. For Scan Mode, select Dedicated EARFCN from the pull-down menu.
2. Identify the CPE LTE duplexing mode, TDD or FDD, and then select Apply.
3. In the EARFCN Settings pane, choose the Band number.
4. Select either EARFCN or Frequency, and enter the associated number to identify the
EARFCN or frequency.
5. Click on Apply.
Figure 22: Dedicated EARFCN (CAT6/7)
26