Table of Contents
Advertisement
7.3 Throughput Statistics
To see how much data is flowing through the CPE, and to see how fast the traffic is moving uplink (to the
eNB) and downlink (from the eNB), scroll down the Status > Overview window to the Throughput Statistics
(Figure 28). The uplink/downlink data is in Kbps, showing the average, the peak, and the Sum (total) CPE
throughput for all connected devices.
Figure 28: Throughput Statistics
7.4 APN Status / Internet Status
For background, refer to
section
6.8.
As you scroll down the Status > Overview window, the APN Status section (it is called Internet Status in
CAT6/7) displays each configured APN gateway (Figure 29). At least one APN (APN1) is by default configured
for the TR-069 connection to the Baicells CloudCore. If the service provider's network uses a Local EPC
(private network EPC), there may be up to four (CAT4) or eight (CAT6/7) APNs.
Mainly you want to check that any gateways you are using show as enabled. On a CAT4 CPE, you can see
the gateway's MAC address, IP address, connection type, and DNS server being used. On a CAT6/7 CPE, you
will see the APN Profile Name, IPv4/v6 Address, and the primary and secondary DNS.
32
Advertisement
Table of Contents
