Table of Contents
Advertisement
7.1 Device Information
To find basic information about the CPE you are using, in the GUI go to Status > Overview (Figure 26). At
the top of the window, you can easily observe the network connection state, signal intensity, LAN state,
and number of devices connected. The Device Info section gives the "look up" type of information such as
product model, hardware version, software version, etc.
Figure 26: Device Info
7.2 LTE Status
The LTE Status section of the Status > Overview window offers USIM card status, IMSI, and IMEI numbers,
as well as real-time LTE signal information (Figure 27). The data provides a more granular level of detail that
pertains to signal strength, signal quality, the eNB connection, which frequencies are being used, and other
wireless metrics.
This information typically is used by the service provider when troubleshooting an issue such as not being
able to connect or stay connected to the network, dropped sessions, reboots, etc. Resolving such problems
requires isolating whether the problem is caused by the device setup, the LAN/WAN network connection,
or a wireless signal problem.
Figure 27: LTE Status
31
Advertisement
Table of Contents
