Figure 3-13 DMZ
3.3
LTE Menu
3.3.1 Connection Settings
LTE connection settings includes Default connection settings, Power Scan Option,
Power Max Option, and 256QAM settings.
3.3.1.1 Default connection
If the Connection Mode is set to Always on, CPE will automatically access the LTE
network after boot. If it is set to Manual, CPE needs to manually connect to the LTE
network.
Figure 3-14 Default Connection Settings
3.3.1.2 Power Scan Option
The CPE support two power scan options, the first is First Detected Cell, and the second
is the Strongest Cell.