System Layout - Inspur NF5180M6 User Manual

3. Locate the CMOS clear jumper on the motherboard.
4. Move the jumper cap from the default pins 1-2 to pins 2-3.
5. Plug in the power cable and power on the server, and then wait for 10 seconds for
the CMOS to clear.
6. Power down the server, unplug the power cable, and then wait for 5 seconds
again.
7. Move the jumper cap back to the default pins 1-2.
8. Reconnect the power cable and power on the server.
3.5

System Layout

The layouts of systems with 2.5-inch and 3.5-inch drives are as below:
Figure 3-13 System Layout with 2.5-inch Drives
# Item
1 PSUs
2 LP PCIe
3 Butterfly PCIe
4 Right PCIe Module
5 Rear 2.5-inch Drive Module
6 Left PCIe Module
# Item
11 Fan Module
12 Super-Capacitor
13 Front 2.5-inch Drive
Backplane
14 Front 2.5-inch Drive Module
15 Front 2.5-inch Drive Module
16 Front 2.5-inch Drive
Backplane
21