E1.S Drive Replacement - Inspur NF5180M6 User Manual

Figure 4-19 Installing the 2.5-inch Drive into the Tool-less Drive Tray (12 × 2.5-inch
Configuration)
3. Open the release lever, and insert the drive module into the drive bay.
4. Close the release lever to lock the drive module in place.
Verify that the activity status LED on the drive tray is green after powering on the
server.

4.4.8 E1.S Drive Replacement

To remove the E1.S drive:
1. Press the release latch to release the lever.
37