BIOS User Manual
4.6
Cable Routing
Blue indicates the data cable routing between the backplane and
motherboard/SAS/RAID controller card;
Red indicates the drive power cable routing between the backplane and the
motherboard.
To prevent damage to electrical components, properly ground the server
before installation. Improper grounding can cause electrostatic discharge.
Please route the cables based on the actual machine configuration.
Figure 4-55 Cable Routing for 4 × 3.5-inch + 2 × E1.S + 2 × M.2 Configuration
Cable
Connected
Between
Power
MB-M.2 Backplane
Cable
Data
RAID Controller
Cable
Card-M.2
Backplane
Power
MB-4 × 3.5-inch
Cable
Backplane
Data
MB-4 × 3.5-inch
Cable
Backplane
Connector A
MB FRONT_BP1
Connector (J147)
RAID Controller
Card Port0
MB FRONT_BP0
Connector (J77)
RAID Controller
Card Port1
59
Connector B
2 × M.2 BP Power
Connector (J1)
2 × M.2 BP SATA0, SATA1
Connector (J2, J3)
4 × 3.5-inch BP Power
Connector (J7)
4 × 3.5-inch BP SATA0-
SATA3 Connector (J6, J7, J8,
J11)